Our Products
Curved Cutting Edges
The thicker curved cutting edges should be used when abrasive wear is a greater problem than penetration.
- Provide better penetration and rolling action, and lend greater rigidity to the entire moldboard assembly for reduced moldboard distortion.
- Recommended for better penetration and carrying existing material forward to leave a smooth even surface.
- Give you increased hardness on the wearing surfaces that outperform standard industries.
Flat Cutting Edges
- Provide maximum strength and wear material.
- Recommended for haul road maintenance.
- In severe applications these edges will provide lowest material cost per hour.
Choosing the right cutting edges for your job will result in reduced labor cost and reduced down-time required to chances.
Undercarriage
Track Shoe
KSS Track shoes supplied in boron steel heat treated are highly wear resistant also in a very abrasive ground condition.
- Single Grouser, Double Grouser, Triple Grouser.
- Specialized in the hot rolling process.
- Variable width, mud holes, clipped corners.
- Available both standard and heavy-duty application.
| SURFACE HARDNESS | as rolled max 248 HB after heat treatment: HB 415 : 515 |
|---|---|
| TENSILE STRENGTH DA N/MM2 |
min 1400 |
| IMPACT STRENGTH KV(+20°a1 ¢) |
>20J |
Track Link
- Improved design of the track joints for lubrication retention. Robust components design to avoid breakage and cracking. Components engineered for highimpact applications.
- New SEAL GROUPS have been engineered in order to meet he highest quality standards and performin Heavy-duty applications. The shape of the seals and the material composition guarantee the best oil retention and lubrication between pin and bushing.
- The new SYNTHETIC OIL used for new KSS chain is in accordance with API Service Classification GL5. The high viscosity index and additional extreme pressure characteristics of the synthetic oil guarantee working conditions with temperature ranging from -35 C to +50 C.
- New KSS LOCK RING (PPR) provides a mechanical lock between the pinand the linkin order to reduce the end-play movements and to control seal compression which enhances working conditions and wear life of pins and bushings.
- The new KSS CARBURIZED BUSHING case depth has been consistently increased in order to ensure maximum wear life.
Idler
KSS Idlers always support strongly all tracks to drive smoothly, which are made by the best steel casting and the special heat treatment. The round grith of Idlers have high hardness of HRC 45-55 that long life can be guaranteed.
Specialized machining and heat treatment proceses enable us to offer a wide range of quality Idlers, or we can use our extensive knowlegde to create special products to meet customers own requirements.
- Tread hardness is similar to Link and Idler for impact strength.
- Life time lubricated for minimum maintenance.
Benefits:
- Balanced wear life to Link and Idler.
- Rebuildable tread.
- Design, Source, Assemble Tracked Undercarriages for all Industries
- Design, Source and Assemble Tracked Undercarriages for a Variety of Industries and OEMs.
- Custom Engineered Tracks.
Heat Treatment Carbon Steel Shaft
All KSS shafts are machined with great accuracy. The advance technique applied is call the “drop forged”. This has a great advantage as the shafts are embedded into the bushings. The contribution of the special heat-treatment technology has imputed in inducing the hardening surface that prolong the life span of the bushings.
Steel Back Bushing
All KSS rollers use the steel back Bi-metal bushing specifically designed, engineered and produced to ensure stability reliability.
Special Casting Seal
All KSS rollers are equipped with the special floating seals. The steel ring are made of coated alloy with lapped mating surface, then heat treated. Chemically treated with high percentage of chromium and molybdenum that will prolong the rollers from oxidation and corrosion. The rubber content is make of Buna-N that is persistent to constant compression. They are able to with stand cold temperature from -40°C to 170°C.
Sprocket & Segment
On the base of the priciple of customer priority and technology supreme, we have continuously done our best in the research and development for the best quality.
With the special alloy steel and the special heat treatment, KSS Sprocket and Segment tooth have the depth of uniform hardness up to 7mm. Therefore, KSS Sprocket and Segment have a high resistance to fatique and also guarantee a long service life.
- Manufactured to accurately mate with the Bushing.
- Tightly controlled manufacturing processes to proper mounting
Sprocket and Segment hardware.
Benefits:
- Long lasting.
- Sprocket and Segment for Dozers are wear resistant and able to withstand breakage & deformation.
Roller
ROLLERS HARDENING PROCESS
The KSS Rollers assembly are designed and constructed to the quality standards of the Japan Heavy Construction Industry. Technologically equipped with the state of the art Robotic Automated System, it ensures a smooth flow in the finest quality of each roller. Thus, KSS rollers in the market has gained its creditability for longer operating life span, free of maintenance, lower operating cost on the undercarriage component of the earthmoving machines. Finally, ready to be delivered for operations. KSS distinguishes from others by their high tolerance to resist ear and tear, even in worst operating conditions. KSS rollers are termed to be the highest quality as each shell is forged with high quality boron steel that allows improved solidification. With additional special heat treatment, it guarantees.
KSS rollers will get your machines rolling! You can absolutely rely on this brand as it has been proven its success for solving the undercarriages system over the decades!
High Technology Friction Welded Shell Roller
All KSS roller shell are forged using high quality boron steel. Enhanced with special induction heating equipment, the shell is re-hardened to the highest level of hardness for internal stress on the treated materials.
The two halves of the roller shelves are friction welded in accordance with different techniques while maintaining the same quality levels. The final result has proven that all KSS roller will have a higher resistance to any force even during the long working hours and climatic conditions.
Sprocket & Segment
Sprockets and rims for excavators are long-lasting and specifically designed for the utmost reliability and best performance in the most severe operating condition.
Tractor segments for dozers and loaders are highly wear resistant and able to with stand both breakage and deformation.
Idler
AFC range of front idlers includes both standard welded and cast types using special steels.
AFC idlers are maintenance-free thanks to the special properties offered by our seal groups.
Roller
AFC range of track and carrier rollers covers the widest variety of crawler machines available on the market: dozers, loaders, excavators, miniexcavators and special machines.
Our rollers offer both high performance and reliability in all working conditions. Thanks to the new designed seal groups, they are long lasting and require no Maintenance.
Excavator rollers are specifically designed, engineered and manufactured for applications where the utmost stability isrequired. Rollers which use environment friendly lubricants are available on request.
Track Chains
Improved design of the track joints for lubrication retention. Robust components design to avoid breakage and cracking. Components engineered for high impact applications.
New SEAL GROUPS have been engineered in order to meet the highest quality standards and perform in Heavy-duty applications. The shape of the seals and the material composition guarantee the best oil retention and lubrication between pin and bushing.
The new SYNTHETIC OIL used for new PREMIUM TLA’s is in accordance with API Service Classification GL5. The high viscosity index and additional extreme pressure characteristics of the synthetic oil guarantee working conditions with temperatures ranging from -35° C to +50°C (or from -31°F to +131°F).
New ITR LOCK RING (PPR) provides a mechanical lock between the pin and the link in order to reduce the end-play movements and to control seal compression which enhances working conditions and wear life of pins and bushings.
The new ITR PLUG is composed by a rubber stopper and a plastic plug.
CARBURIZEDBUSHINGcasedepthhasbeenconsistently increased in order to ensure maximum wear life.
Track & Carrier Rollers
ITR Premium rollers provide excellent performance in demanding environments.
ITR Premium rollers have been specifically conceived, designed and manufactured for mining, quarrying and heavy-duty applications.
Track rollers feature highly-strengthened steel and a reinforced structure to reduce wear and absorb shocks and impacts.
Single flanged, double flanged, as well as carrier rollers, forged from selected and certified boron steel, are through-hardened via differential quenching or through-hardening for extended wear life and extreme resistance to fatigue, stress and impact.
ITR Premium rollers are Lifetime lubricated as a result of use of top-class seals, extensive oil capacity and re-engineered internal flow for uniform and constant lubrication.
ITR Seals, expressly conceived to be used in severe applications, feature excellent performances up to -40°C.
Internal components such as bushings, collars and shafts are designed, produced and tested in the groups facilities to guarantee an accurate fit as well as thorough and consistent lubrication for the best internal lifespan.
Idlers
ITR Premium Idlers are manufactured to provide excellent wear resistance.
ITR Premium Idlers are manufactured through casting a complete range of solid and drum-types, following the application requirements.
All internal components are designed, produced and tested in the groups facilities to guarantee an accurate fit, as well as, the highest reliability and the best lifespan.
Extended wear resistance is assured by specific heat-treatments in order to harden the contacting surfaces. ITR Seals are expressly engineered for heavy-duty applications featuring excellent performances in a temperature range between -40°C and +50°C.
Segment Groups
ITR Premium segments are the result of the precise forging of excellent boron steel.
ITR Premium segment groups are purposely designed to service extreme and severe working conditions in highly abrasive and impact job-sites.
ITR segment groups are the perfect match for Premium Track chains in order to reduce the wear on bushings, maximizing the lifespan.
Surface and core hardness provides longer wear life and resistance to bending and breakage especially in tough applications.
Accurate design and machining of the assembling areas guarantee the finest performance during machine operations.
